ValueRAM's KVR26S19S6/4 as a 512M x 64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin SODIMM uses gold contact fingers.

Power Supply: VDD = 1.2V Typical

VDDQ = 1.2V Typical

VPP = 2.5V Typical

VDDSPD = 2.2V to 3.6V

Nominal and dynamic on-die termination (ODT) for

data, strobe, and mask signals

Low-power auto self refresh (LPASR)

Data bus inversion (DBI) for data bus

On-die VREFDQ generation and calibration

Single-rank

On-board I2 serial presence-detect (SPD) EEPROM

8 internal banks; 2 groups of 4 banks each

Fixed burst chop (BC) of 4 and burst length (BL) of 8

via the mode register set (MRS)

Selectable BC4 or BL8 on-the-fly (OTF)

Fly-by topology

Terminated control command and address bus

PCB: Height 1.18" (30.00mm)

RoHS Compliant and Halogen-Free

Series
Kingston ValueRAM

DDR Type
SODIMM DDR4

Size
1 x 4GB

Speed
2666 MHz

Compliance
PC4-21300

Pins
260-pin

CAS Latency
19-19-19

Data Integrity Check
Non-ECC

Voltage
1.2V